BHNVN - KOT ALUMINUM PAINT
- MSDS: BHNVN
- Manufacturer: STATE CHEMICAL MANUFACTURING CO
- Product Name: KOT ALUMINUM PAINT
- National Stock Number: 8010-00N010573
Product Identification
Product ID:KOT ALUMINUM PAINT
MSDS Date:11/01/1985
FSC:8010
NIIN:00N010573
MSDS Number: BHNVN
Responsible Party
CLEVELAND, OH 44114
Emergency Phone: 216-861-7114
Info Phone: 216-861-7114
Cage: 53798
Contractor
Telephone: 216-861-7114
Cage: 53798
Ingredients
METHYLENE CHLORIDE (SARA III)
CAS: 75-09-2
RTECS: PA8050000
Fraction By Weight: <25%
OSHA PEL 500 PPM/C,1000; Z2
ACGIH TLV: 50 PPM, A2; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: <50%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
PROPANE
CAS: 74-98-6
RTECS: TX2275000
Fraction By Weight: <15%
OSHA PEL 1000 PPM
ACGIH TLV: ASPHYXIANT; 9192
50 BLEND OF ISOBUTANE & PROPANE)
CAS: 75-28-5
RTECS: TZ4300000
Fraction By Weight: <15%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:N/K
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:DANGER:HARMFUL OR FATAL IF SWALLOWED
OF DELIBERATELY INHALED.
Explanation of Carcinogenicity:METHYLENE CHLORIDE:ACGIH A2=SUSP HUM
CARCIN (1989).INAD EVID FOR CARCIN IN HUM;SUFF EVID FOR CARCIN IN
ANIM (IARC 1987).
Effects of Overexposure:EYES/SKIN:DIRECT CONTACT CAN RESULT IN
IRRITATION.INGESTION/INHALATION:MAY BE HARMFUL OR FATAL IF
SWALLOWED OR DELIBERATELY INHALED.
Medical Cond Aggravated by Exposure:N/K
First Aid
First Aid:EYES:FLUSH IMMEDIATELY WITH PLENTY OF COOL WATER FOR AT LEAST
15 MIN.CONTACT MD.DO NOT WEAR CONTACT LENSES WHILE USING THIS
PRODUCT.SKIN:WASH WITH PLENTY OF SOAP & WATER.IF IRRITATION
PERSISTS,CONSULT MD.INGESTION:DO NOT INDUCE VOMITING.CALL MD
IMMEDIATELY.INHALATION:REMOVE TO FRESH AIR.IF IRRITATION
PERSISTS,CONTACT MD.
Fire Fighting
Flash Point Method:TOC
Flash Point:PROPELLENT:<20F
Lower Limits:N/K
Upper Limits:N/K
Extinguishing Media:CARBON DIOXIDE,DRY CHEMICAL OR FOAM.
Fire Fighting Procedures:WEAR PRESSURE DEMAND SCBA AND FULL PROTECTIVE
EQUIPMENT .KEEP CANS COOL.USE SHIELDING TO PROTECT PERSONNEL FROM
VENTING,RUPTURING OR BURSTING CANS.
Unusual Fire/Explosion Hazard:EXTREMELY FLAMMABLE.EXPOSURE TO TEMP
>120F,49C MAY CAUSE CANS TO VENT,BURST OR RUPTURE.POSITIVE FLAME
EXTENSION.HAZ DECOMP PROD:CO,CO*2,HCL OR PHOSGENE GASES.
Accidental Release
Spill Release Procedures:REMOVE SOURCES OF HEAT,SPARKS OR
FLAME.VENTILATE AREA OF SPILL.ABSORB SPILL ON SAND,VERMICULITE,ETC.
Neutralizing Agent:N/K
Handling
Handling and Storage Precautions:DANGER:EXTREMELY FLAM.CONTENTS UNDER
PRESS.DO NOT PUNCTURE/INCIN CANS.DO NOT USE NEAR HEAT,SPARKS,OPEN
FLAME OR STORE IN DIRECT SUN OR >120F,49C.
Other Precautions:NO SMKNG IN AREA OF USE.DO NOT USE IN GENERAL VICIN
OF ARC WELDING,OPEN FLAMES OR HOT SURFACES.HEAT &/OR UV RADIA MAY
CAUSE FORM OF HCL &/OR PHOSGENE .READ & FOLLOW ALL LABEL DIRECTIONS
& PREC B EFORE USE.FOR INDUSTRIAL & (SEE SUPP DA)
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .AVOID BREATHING OF VAPOR OR SPRAY MIST.
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW TLV .
Protective Gloves:OPTIONAL
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:N/K
Work Hygienic Practices:DO NOT WEAR CONTACT LENSES WHILE USING THIS
PRODUCT.
Supplemental Safety and Health
% VOLATILE BY WEIGHT:>85.OTHER PREC:INSTITUTIONAL USE ONLY.KEEP OUT OF
THE REACH OF CHILDREN.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Vapor Density:N/K
Evaporation Rate & Reference:N/K
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AN ALUMINUM-COLORED PAINT WITH A SOLVENT ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS OR CAUSTICS.MAY AFFECT SOME PLASTICS.
Stability Condition to Avoid:EXPOSURE TO TEMPERATURES >120F,49C,SPARKS
OR FLAMES.
Hazardous Decomposition Products:BURNING MAY RESULT IN FORMATION OF
CARBON MONOXIDE,CARBON DIOXIDE,HYDROGEN CHLORIDE OR PHOSGENE GASES.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .DO NOT PUNCTURE OR INCINERATE
CANS.GIVE EMPTY CANS TO A DISPOSAL SERVICE EQUIPPED TO SAFELY
DISPOSE OF PRESSURIZED CONTAI NERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.